CLOSED LOOP GATES GT2 EPDM High Temperature Belt LL-2GT-E (6mm/9mm wide)

Sold by 2.4M lengths, belts have been cut for shipping purposes, but were manufactured as closed loop. If buying for Ratrig, will only fit on 300 VC4, as well as the 300 and 400 VC3.

These belts started as Closed loop belts meaning they are not long-length belts, they are the belts used to cut long-length belts however so will be marked as such. These are custom cut on the machine so they don’t have the downsides of long-length belts.

“Long-Length belting is produced in Spiral form. Spiral cut belting is produced from a belt sleeve by moving the slitter laterally while the belt sleeve is rotating. The resulting belting does not have continuous tensile cords, and the teeth are not perfectly perpendicular to the longitudinal axis of the belt. As long as the belt width is narrow, these properties have been found to contribute little if any detrimental effects to belt performance. Tensile modulus and strength are equivalent to conventional endless and long length belting.”

Genuine Gates Powergrip® 2GT Belts. Compatible with Genuine Gates 2GT, GT2, and GT3 components in 2mm tooth pitch.

• Fiberglass tensile cord provides high strength, excellent flex life, and high resistance to elongation.
• Tooth facing reduces friction of belts in the pulley and resists abrasion
• A uniquely designed tooth profile distributes strain across the entire belt allowing the belt to handle greater loads.

• Rated to 135C

Quiet, durable, and strong.